Home

"Whale Watching" Scrub Hat

This is  bouffant style of scrub hat. It has pleats in front and a drawstring with a toggle in the back making it possible to adjust the fit for any head size. 
Whale watching pattern


  1. I just love the aqua blue of this fabric and the cute little pink and yellow fish on it; but the name of this hat comes from the majestic whales that are on it. 


The pleats are not marked out on the pattern. They are just created by pinching and pinning down the fabric. They don't all have to be exactly the same size or distance apart they still look great. I will explain how to make the pleats fully in the tutorial. If you consider your sewing expertise to be at an intermediate level you should find this hat fairly easy to make.
Supplies Needed to make the "Whale Watching" Scrub Hat:
Printer connected to your computer
Copy paper
Tape
Paper scissors
cutting mat and cutting wheel or fabric scissors
approximately 1/2 yard of fabric (suggest a cotton)
thread (suggest cotton)
small piece of light weight fusible interfacing (for headband)
about 12 inches of cording
toggle for cording
sewing machine
serger (optional)
freezer paper (optional, you can buy this in many grocery stores in the section by the tin foil and wax paper)

Tutorial:
Step 1: Download the pattern from Pattern Downloads. Print the pattern out, then tape sheets together as instructed. Cut out pattern on solid lines.
Step 2: Start with "Top piece A". Lay the pattern out on your fabric. If the fabric has pictures on it keep in mind which way the pictures are facing in relationship to the pattern. Think about someone standing behind you and looking at the hat. The pictures should be facing right way up. This means the pictures may look a little upside down at the front but this doesn't matter because you will make sure the pictures face the right way up on the headband. This is the way the hat will look the best. Place the pattern on a fold as instructed. Think about where to make the fold. Just make the fold big enough to fit the pattern piece. If you fold the fabric in the middle just as it comes off the bolt the pieces left on either side will not be long enough for your front headband.

Optional Alternative:  Take a piece of freezer paper. Fold in half. Place pattern on fold, then cut out. You are left with a pattern piece that you can iron right onto your fabric. (Shiny side down when you are ironing) This way you don't have to fold your fabric. The pattern will stay put as you are cutting it. You will be easily able to remove it after cutting, and it will not leave residue on your fabric. You can reuse this paper several times before it is worn out.
As you may notice if you are really observant I accidentally placed my pattern upside down for the pictures on the fabric. Luckily I double checked and noticed this before I cut it out. I just peeled off the freezer paper and turned it the right way around before I cut. (The bottom of the mushroom stem is the back of the hat)

Step 3: If you have a serger, serge the straight bottom edge of the mushroom stem. Then serge all the way around the curved edge of the mushroom shape. If you do not have a serger you may want to zig zag stitch these areas. Now  looking at the drawing below sew the two edges together as shown. Make sure you put the right sides of the fabric together. If you use a sewing machine you should also zig zag stitch the edges of the seam allowance to prevent fraying.
This is a drawing of the pattern piece. Sew where I have drawn the dotted lines.
This seam doesn't show when the hat is worn. It is at the bottom back of the hat. I pulled it over to the side a little just to point it out here.

Step 4: (You can don this step before Step 3 if you want to finish cutting everything at once.)
Cut two headband pieces out of fabric. Once again place the pattern piece on a fold of the fabric. Think about pattern direction and what you want in the middle of the headband. I wanted a little school of fish in the middle of the headband so I made sure the school of fish were on the fold. The straight edge will be the bottom of the headband and the curved part will be the top of the headband.
Cut one headband interfacing. This just adds a bit of body to the headband without making it too stiff. Iron it onto the back side of one of the headband pieces. (I ironed it to the piece that would be sitting next to my forehead.)
Next place right sides of both headbands together and sew the straight edge.

Open up and give it a little press with the iron.

Fold it in half again so that the interfacing is in the middle and the right side of the fabric is facing up. 
Give it another press with the iron.
You will notice that at each end there is a little "tail" from the seam allowance. Just take a pair of scissors and snip these little "tails" off.
Now open it up one last time. Carefully iron the seam allowance under 1/4 inch on  the curved edge of  the part that will be facing out when you are wearing the hat. This is preparing the brim to be top stitched onto the hat later. Close it back up again so right sides of fabric are facing out. Mark the center point of the headband by folding in half  and pressing a bit with the iron. (no picture of this)
Step 5: Time to  make the pleats. The idea here is to create pleats starting at the middle of the front of the hat. They will extend all along the front and side where the brim is attached. Just behind the brim you want to stop pleating.  This portion will be gathered by the drawstring. 
This photo should give you an idea of what we are going for here. Notice I created a crease with the iron to mark the center from of the hat. The pleats have all been created to go away from the center point. See how the back portion of the hat is gathered by the drawstring.
I created the pleats by pinching one finger width of fabric at a time and then pinning down. I started in the middle and worked my way out. As you can see here it looks like I'm forming the pleats facing towards the middle of the had but that is because we are looking at the back side of the fabric. Once we flip it over and look at the front they will look like they are going away from the center. I made six pleats on each side. Try making six pleats then hold the center point of the headband to the center point of the hat. Line up the edges of both pieces and see where the pleats stop. If the pleats extend farther than the brim adjust them so they don't. If you made small pleats you may need to add more.Carefully sew the pleats in place removing pins as you go. You do not want to lose the placement of the pleats. 
Now you can see your hat is really taking shape!
                                                                   
Step 6: Line the brim up with the hat. The brim must be open. The inside part of the brim curve will be placed to the inside of the hat. In other words the right side of the fabric of the inner brim goes to the wrong side of the fabric of the hat. Match the middle points together by placing the brim on top of the hat. Put one pin at the middle point and match the rest up pinning as you go.  Before you start sewing look at where the transition point will be from the brim to the part of the hat that gets the drawstring. You want this transition point to be as smooth as possible. (My transition point didn't turn out perfect because I top stitched the straight bottom edge of the headband before I sewed the headband on.)  Using the iron just press the bottom edge of the hat under a little at this transition point. It will get sewn down later when you sew  in the           drawstring.                                                                                                                                             
 Sew the brim on  with care, removing the pins as you go. Keep the edges of the hat and the edge of the brim nicely matched up as you go.          
                                                                                             
Flip the brim closed and top stitch the straight bottom edge of the brim so it looks nice. Carefully top stitch the curved edge of the brim down to the front of the hat. Make sure the brim is lying nice and flat as you go. You do not want any ripples in it.              
                                               
Step 7:  Iron the bottom edge of the hat that is not included in the brim under 1/2" (You have already ironed a small portion of it before you sewed the brim on. Now just iron the rest.) Find the middle of the back of the hat. Make a small crease to mark the spot with the iron. Cut a small piece of interfacing 1/2" by 2 inches. Iron this on at the middle of the back.
 Make a small buttonhole on either side of the center point. (not pictured)

Step 8: Cut a piece of cording about 11-12 inches long. (Mine was a bit longer but the tail hangs down a little longer than I would like at the back) Thread each end of the cording through the toggle. Thread the ends of the cording through the buttonholes. 
Securely sew the end of the cording down on each side  inside of the seam allowance just close to the transition point where the brim ends. Tuck the cording in close to the fold at the bottom edge. Stitch  all the way along the bottom close to the edge. May sure you don't catch the drawstring anywhere along your stitching other than at the ends where they are secured. 

If your drawstring is shorter than the distance of the bottom seam there will be some gathers in the bottom edge that you will need to adjust as you sew along. You just want the portion you are sewing at the time to be free of gathers. 
That's it, project is complete! How did it go? Please leave feedback for me. I would like to hear how it went. Were the instructions easy for you to understand. Is there a step that could be worded differently to make it easier to understand?  I would like to see your project on the flickr page. 







91 comments:

  1. Tried to download pattern and it says there is no page for this blog. Can you send it to me?

    ReplyDelete
    Replies
    1. I couldn't not download it and even tried the link provided below for the whale pattern. No luck.

      Delete
    2. Click on the picture of the hat.

      Delete
  2. Cant download pattern can you help!😯

    ReplyDelete
  3. can't seem to download is it possible for you to send copy of Whale watching? I would like them all if possible. Perhaps you could help me download.
    thanks in advance for any help you may be able to provide.
    Lova

    ReplyDelete
  4. can't download pattern could you please email. thank you'
    white062001@yahoo.ca

    ReplyDelete
  5. I am looking forward to making this for my daughter but I'm not sure what these directions mean: "Now looking at this mushroom shape, the edge that looks like the bottom of the mushroom cap and the edge that looks like the side of the stem need to be sewn of serged together. Make sure you put the right sides of the fabric together." Do you have a picture or drawing of what this should look like when sewn? Thanks!

    ReplyDelete
  6. I volunteer in a kitchen and have to wear a head covering at all times. I saw it his one and knew it would work perfectly. I loved the way this scrub hat looked when I got it done. The pattern was really easy to follow until I got to the little side seams. I thought the right side was sewn to the left. When it wasn't going to fit, I realized the L shaped sides were sewn to themselves did I understand. I used a contrasting color for the brim and it really popped. It is really comfortable to wear and I plan to make many more.

    ReplyDelete
  7. Did anyone eventually get the pattern to download?

    ReplyDelete
  8. Where do you download the patterns at?

    ReplyDelete
  9. Just click on the photo below the description of the hat.

    ReplyDelete
  10. Anyway the pattern can be emailed to me?? This site says doesn't exist..my email is: luciller1@live.com.. Thank you

    ReplyDelete
  11. I cannot find a download on this. can you email the actual pattern pieces to me also? I can copy this article- just need the pattern pieces... thanks! cherylshimp@yahoo.com

    ReplyDelete
  12. please email this pattern to me cant download it anglia32@gmail.com

    ReplyDelete
    Replies
    1. have you received the pattern? I wanted to ask before I requested it myself

      Delete
  13. Can i please have a way to download pattern?

    ReplyDelete
  14. Tried the whale watching hat (which, by the way, looks beautiful). Your instructions were really easy to follow! The plaits were a bit tricky and in the end I should have made one more, because the brim ends too early and I had to tuck it under when attaching the cord. And I should have made the whole hat a bit larger, because I wanted my long hair to fit in, but it is too snug. I guess I have to change the shape for that and make it longer or more egg-shaped. However, I have a fried with short hair, she'll get the hat as a present :-). But I like the bulbous look of the cap so much, that I plan to make one as a summer cap with a peak (or visor, or how you call it). Thank you very much, I finally found a hat that suits me :-*

    ReplyDelete
    Replies
    1. I use a fork to make pleats. slide the fabric between first and second tine. Then role the fork and sew! Makes perfectly sized pleats!

      Delete
  15. I've sewn 2 bonnets, so far, and I really like how they turned out. The second one that I made, I added almost a full inch to the entire circumference of the top piece. I left the brim size alone. Love this even more than the original. Thank you for sharing this. I enjoy wearing my bonnets in sterile processing.

    ReplyDelete
    Replies
    1. By the way, I have waist length hair and the second bonnet fits all of it, comfortably.

      Delete
    2. That's a very useful hint ;-), thank you very much. I suppose you made more plaits then. I'll try ...

      Delete
  16. Thank you so much! Made 3 so far!

    ReplyDelete
  17. I could find the Download pdf. Will you be able to send the pdf file to my email? Katievi@yahoo.com.

    thank you. And god bless!!

    ReplyDelete
  18. I can't seem to get the pattern please email @ cuddliez@outlook.com thank you

    ReplyDelete
  19. I had the same problem, but found it by just clicking on the very first image of the hat! Good luck

    ReplyDelete
  20. I just found the pattern! Thank you!

    ReplyDelete
  21. Thank you for this pattern from Canada! My ER nurse dil and her staff thank you too!

    ReplyDelete
  22. Thank you for the pattern. I plan to get started on a few this week!
    KY ICU nurse

    ReplyDelete
  23. I can't seem to locate the pattern- can it be emailed to me ?

    ReplyDelete
  24. https://drive.google.com/file/d/0B772OSgWmAFITGRDa0t3VHlsSVE/edit
    Dragonfly hat, this is where I got pattern from.

    ReplyDelete
  25. Hello, I've made my first one, based on your pattern, and I have a question: what is the bottom of the mushroom for? My ponytail? I can't see any reference to it, and I've read thru the pattern several times. I'm sure its there, but I can't find it. I'm cross eyed from making so many masks ;)

    ReplyDelete
    Replies
    1. I hope it's okay that I put an answer here. I've just put this together and needed to tear out the portion of the mushroom because I was looking at it the same way. Looking at the L of the mushroom, if you think of the horizontal line as A and the vertical line as B, A attaches to B on the same side. I had them attached A to A and B to B across from each other and got a "ponytail" hole. If you hook them together right, it makes a big roundish shape with 2 darts in the back and pleats in the front. Hope this helps someone!

      Delete
    2. perfect thanks. I originally looked at it like you had, but thought, hmmm that can't be right. I had just figured out in my head to sew A to B on each side, when I read your comment.

      Delete
    3. Can either of you tell me where the brim is supposed to end...mine goes all the way to the dart, so are my pleats too big, taking in too much fabric. Also trying to figure out how you turn up 1/2"on the back without turning up the brim if the end of the brim is flush with the bottom of the hat...I'm just confused

      Delete
  26. I am unable to find the pattern. Please send it. Thanks carolyn_4949@hotmail.com

    ReplyDelete
    Replies
    1. http://freepatterns4scrubhats.blogspot.com/p/pattern-for-whale-watching-scrub-hat.html?m=0

      Delete
  27. I don’t see where to download the pattern. Can you email it so I can print it ASAP.
    Thanks

    ReplyDelete
    Replies
    1. I tried this link and the one at the top of the page for the whale pattern but am unable to down it. I was successful with the dragonfly pattern.

      Delete
  28. I clicked on the first image of the hat based on what another person wrote and was able to download and print. Haven't tried to sew it up yet but I love the design.

    ReplyDelete
  29. I'm stumped by the cording toggle. What kind did you use? Is the cording elastic? What is the dimension of the cording?

    ReplyDelete
  30. Here is a link on Amazon to the "cord locks" and some replacement cording that I think I'm going to get for this project. Different colors of cording and the cord locks in one kit. https://smile.amazon.com/Luckkyme-Replacement-Drawstrings-Drawstring-Re-Threader/dp/B083FZ9W9B/ref=sr_1_53?crid=3M6W6I1PF9GGU&dchild=1&keywords=cord+locks+for+drawstrings&qid=1586002578&refinements=p_85%3A2470955011&rnid=2470954011&rps=1&sprefix=cord+lock%2Caps%2C181&sr=8-53

    ReplyDelete
    Replies
    1. Thank you! Unfortunately, it does say Currently unavailable. But at least I know what I'm looking for...

      Delete
    2. if you have an old dead backpack sometimes they have cording and the cordlocks on them. I have a stash that i have cut off from years gone by

      Delete
  31. This comment has been removed by the author.

    ReplyDelete
  32. Is it possible to load a picture of what ties look like. I am having a hard time putting in the ties.

    ReplyDelete
  33. I am confused by the sewing of the mushroom. is it suppose to form a tube? Help

    ReplyDelete
    Replies
    1. No, it should not form a tube. You will sew two seams, one on the right and one on the left. Fold each L-shape over onto itself; the rounded edges will be joined to the flat bottom edge.

      Delete
  34. Hello. I was able to print out the instructions but not the pattern. I desperately need the pattern as I have multiple nurses at 2 hospitals here in Colorado who need the scrub hats. I am doing this as a gift for them to help keep them safe. I see no place to download the pattern. HELP PLEASE!

    ReplyDelete
  35. What size seam allowance did you use?

    ReplyDelete
  36. Is the flat part supposed to be the front of the hat, or is the mushroom top the front? Trying to figure out where to put my pleats.

    ReplyDelete
    Replies
    1. The round part is the front. The flat part gets sewn up as a casing around the elastic cord in back.

      Delete
  37. I have the pattern but cant find the instructions. Could U email me the instuctions? tkeller@bbtel.com

    ReplyDelete
  38. Is there a YouTube video Of this anywhere? I am lost on step 6 and really feel like if I could see it I would understand it more

    ReplyDelete
  39. Thank you for offering a FREE pattern and instructions! It is during the middle of the COVID-19 infection, and my daughter-in-law, who are nurses, have asked for these hats as protection. It seems that everyone is trying to cash in and make money off these medical professionals while I just want to help them. God bless you and your family!

    ReplyDelete
  40. Thanks for the great pattern! Can you tell me what diameter your cording was? Did you use elastic cording or something more like paracord?

    ReplyDelete
  41. Can't download pattern. An you send.

    ReplyDelete
  42. Hi, have you tried printing as a PDF? Instead of saving, go to print, print as PDF, it will prompt you for a file location name, you can save it as a PDF file. I believe you will need to have a PDF viewer installed on your computer; I'm not sure. A free one is Foxit. But once you save as PDF, you can print from the file.

    ReplyDelete
  43. Do you cut 2 of the mushroom part?

    ReplyDelete
    Replies
    1. No just one mushroom part. And you sew the left horizontal edge to the left vertical edge to box that corner. Same on the right.

      Delete
  44. Thank you for the pattern. My girlfriend asked for a cap and with all the stores closed I could not run out to buy a pattern. The pouf was a little small for what I was looking for but I modified your pattern and now have small (Yours-17"), medium (20") and large (22"). Once you get the hang of it they are so easy to make. And a great way to use up fabric.

    ReplyDelete
    Replies
    1. Ann, how did you make the different sizes? Add onto the size of the pattern? Did you also add onto the brim? Thanks!!

      Delete
  45. Thank you so much for providing fun and easy patterns. I made 2 for my daughter and she asked for a couple more and "Oh by the way, Mom, could you make 8 for my co-workers?" Apparently they are a hit and fortunately I have a large stash so they can all be different. After about 225 masks they are a nice change. Thank you and take care.

    ReplyDelete
  46. I am able to download but not print 😢 can someone give me any measurements so I can attempt to draw it out?

    ReplyDelete
  47. so, did anyone else make their pleats too big and made their hat too small? and I saw someone say something about a fork! That will help out greatly!

    ReplyDelete
  48. How can I make this larger where it can fit dreads that go to my waist?

    ReplyDelete
  49. I don’t see where to download the pattern. Can you email it so I can print it : maricelacc1@gmail.com
    Thanks

    ReplyDelete
  50. Thanks for publishing this pattern. I have made about 4 dozen for nurses in two hospitals, a trauma-1 and a regional campus of a university hospital. It has been a god-send during the coronavirus outbreak. I lengthened the stem about 3/4" to give a little extra room for low buns for ladies with heavy hair. The band was especially helpful for wearing PAPRs and face shields, for hair management and for protecting the forehead. With supplies lacking, I had to make ties from self-made binding. I inserted through right buttonhole and toward left into that seam, then second tie into left buttonhole and then into right seam. Thus, the ties overlap between the buttonholes, but this makes the ties pull against the seam end and not tear out the buttonholes (as well as tie up nice and tight without effort). Again, we are in your debt... Several others have used the pattern to make scrub hats for their nurses as well. All of these have been donated to nurses.

    ReplyDelete
  51. Can this be made using elastic instead of cording. Also can you print out instructions without the red background.

    ReplyDelete
  52. Also can it be made reversible.

    ReplyDelete
    Replies
    1. I made reversible! I can send you the pics/instructions!

      Delete
    2. Can you please send me the pics/instructions as well? Goldenqueen1981@gmail.com

      Delete
    3. This comment has been removed by the author.

      Delete
    4. Can you send me the instructions to make it reversible. Thank you. mafent5928@yahoo.com

      Delete
  53. please email pattern...can't access thru website or links. BREWPAAB@VERIZON.NET

    thank you

    ReplyDelete
  54. I’ve made a ton of these caps free of charge and all the nurses that have gotten them are so delighted! I’ve added buttons on the sides so they can put the elastic on their masks around them to protect their ears.

    ReplyDelete
  55. Hi, please email pattern. Thanks

    ReplyDelete
  56. Please email the pattern... dukefan12@comcast.net Thanks so much!

    ReplyDelete
  57. I don't see the pattern download. Would you be kind enough to e-mail it to me at cindy.woods.rn@gmail.com. I want to make them for the nurses at my hospital! Thanks a bunch!!

    ReplyDelete
  58. I made 7 of these for a covid ward nurse but I made the REVERSIBLE! I have instructions/photos of the additional steps. Happy to share! Ust email me at Oneofakindkaraoke@gmail.com

    ReplyDelete
  59. “I could not have closed on my first home without Mr, Benjamin Lee ! Benjamin and his team went above and beyond for me on this transaction. He handled my very tight turn around time with ease and was always available for me when I had questions (and I had plenty), even when he was away from the office, which I greatly appreciated! He and his team handled many last-minute scrambles with the seller and worked tirelessly to make sure that I could close before my lease (and my down payment assistance, for that matter) expired. Mr Benjamin is incredibly knowledgeable Loan Officer, courteous, and patient. I went through a couple offers on properties before my final purchase and Benjamin was there to help with each one, often coordinating with my agent behind the scenes. I felt supported throughout the entire process. Thanks to Benjamin and the tireless efforts of his team, I am now a proud home owner! I would encourage you to consider Benjamin Briel Lee for any kind of loan.Mr, Benjamin Lee Contact informaions.via WhatsApp +1-989-394-3740  Email- 247officedept@gmail.com.

    ReplyDelete
  60. Is there a video tutorial as to how to make this hat?

    ReplyDelete
  61. Woah! I'm really enjoying the template/theme of this site. It's simple, yet effective. A lot of times it's tough to get that "perfect balance" between user friendliness and visual appearance. I must say that you've done a fantastic job with this. In addition, the blog loads very quick for me on Firefox. Superb Blog!

    ReplyDelete
  62. I would live clearer instructions on where the brim meets the hat. I have made the best of it but I think I am doing something wrong. Better pics would be awesome!

    ReplyDelete
  63. I completed the hat and all went well, thank you for the pattern and instructions. I do need to somehow alter the pattern to accomodate for long hair, do you have any suggestions on how to alter to allow the back section that has the draw cord to be fuller and maybe hang down so it will hold long hair. If anyone has done this I would love to hear how. Thank you. Mary Ann

    ReplyDelete
  64. I found the pattern but the instructions are confusing and make no sense

    ReplyDelete
  65. Thank you so very much for posting your patterns. I downloaded your patterns a couple of years ago and made them. Now I am downloading them again to make a few more scrub caps for coworkers. Thank you for sharing!!!

    ReplyDelete